Speedfan 4.33 disponible

Actualité postée le: Vendredi 21 Septembre 2007
Par notre équipe: fifi86
Cet article a été lu 2019 fois
Catégorie: Générale , mots clé associés:  Aucun
 


Une nouvelle version de Speedfan est disponible en téléchargement, la version 4.33 ...



Voici la liste des nouveautés :

- completely rewritten the detection and the identification strategy of ITE IT871xF chips (fan readings are now ok)
- xAP support is now properly reenabled between sessions
- fixed context sensitive help (F1 key) on Windows Vista
- enabled, if needed, the SMBus on Intel ICH7 and ICH8-M
- added several checks to CPU usage routines, fixing a nasty issue where an error window appeared once every second
- added full support for ATI SB600 SMBus
- added full support for Intel ICH9 SMBus
- added full support for nVidia MCP55 SMBus
- added sull support for ADT7475
- added nVidia Control Panel access to read video card temperatures
- supported the IT8716F and the IT8718F hardware monitor at unusual addresses
- added some SMB scan exceptions for Compal 08A0
- SMBus address $15 no longer scanned on AOpen i975Xa-YDG
- fixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program start
- added support for Fintek F71872F voltage readings
- IT8712F-J now uses two undocumented FAN DIVs
- speeded up Asus M2N32-SLI DELUXE program startup
- added detection of an unknown Fintek chip (to avoid false detection of other sensors at the same address)
- W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCED
- W83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE / ADVANCED
- fixed FAN DIVISOR settings for Winbond W83791D
- added PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHG
- warning temperature can now be set as high as 125C in CONFIGURE



Merci à Lambda34
 
Vos réactions
 
Le: Vendredi 21 Septembre 2007
Commentaire par: Krieg-Maschine
J'ai jamais trippé sur ce programme au look vieux et laid mais peut-être que la nouvelle version saura me faire plaisir. "Pensez pas croche (-_-)".
 
 
MON COMPTE

Devenir membre ?

Pour avoir accès à toutes les fonctionnalités de Génération 3D, vous devez vous identifier. Si vous n'êtes pas encore membre inscrivez vous gratuitement sans plus attendre pour rejoindre notre grande communauté francophone.

Se connecter

J'ai perdu mon mot de passe